RSS

Official 2.3.6 Firmware with bootloader

Install Android 2.3.6 Gingerbread Official Firmware with bootloader on Galaxy Y Duos S6102

Note it:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Procedure :

  • Download Android 2.3.6 XXMC2 Firmware with bootloader for Galaxy Y Duos S6102 & Extract it.

rrrrrr

  • Switch off your phone and boot Galaxy Y Duos S6102 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear),

2

  • now press Volume Up key to proceed to Download Mode.

3

  • Extract the downloaded Odin3-v1.85 zip file and run the Odin3-v1.85.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  • Now connect your Galaxy Y Duos S6102 to your computer via USB cable (Must need to instal USB Driver )
  • In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  • Make sure that the Below thing. & See the Screenshot to Confirm
    • PIT –> torino_1205.pit
    • Bootlader –> BOOT_S6102DXLC2_REV01.tar.md5
    • PDA –> PDA_S6102DXLC2_REV02.tar.md5
    • PHONE –> MODEM_S6102DXLC2_REV01.tar.md5
    • CSC –> GT-S6102-MULTI-CSC-OLBLC2.tar.md5

66014611

  1. Now, click on the Start button to begin the installation process, wait few moments.
  2. Once completed, you would see “PASS!” message in ID:COM port having green background
  3. Your phone should automatically reboot after completion
  4. You can now disconnect your phone from computer
  5. Finish

Congratulations, your Galaxy Y Duos S6102 is now updated to the latest and official XXMC2 Android 2.3.6 Gingerbread firmware. Hope you successfully completed the update process.You can confirm the firmware update from Settings-About Phone.
Download Link :

  • Android 2.3.6 XXMC2 Firmware with bootloader


NB : Any Kind Of Damages I am not responsible. Do it at your Own Risk

Source : Xda

 

One response to “Official 2.3.6 Firmware with bootloader

  1. Rafael Francisco

    April 30, 2016 at 12:29 am

    Worked!!! Thanks for help!

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: